|
CP-412-100
Product introduction
CP - 412-100 is designed for ammonia refrigeration system customized high solubility synthesis of polyether type freezing oil. The lubricating oil for high temperature and low temperature environment to provide an improved lubrication, reducing the volatile and using mineral oil and mineral oil and the design of equipment compatible.
CP - 412-100 can be dissolved in ammonia, enhancing the heat transfer of evaporator. The high solubility and improve the characteristics of the oil return, especially in DX type evaporator. When the evaporator temperature more than 100 f the best work efficiency can be obtained.
Product data ：
|
A typical technical parameters |
CP-412-100 |
|
Viscosity@770F |
236 |
|
Viscosity@1000F |
110 |
|
Viscosity@2100F |
12 |
|
Viscosity index |
106 |
|
Proportion250C |
0.989 |
|
Pour point0C |
-32 |
|
Density，lb/gal |
8.25 |
|
Flash point
，0F（0C） |
456（236） |
|
4 - extreme pressure ball |
- |
|
Weld load |
126 Kg |
|
No catch the load |
50 Kg |
|
Load the wear index |
29.3 |
|
4 - the ball wear |
|
|
ASTM D-2288
40 Kg，1200
RPM |
0.47 mm |
|
Water，Weight，% |
0.008 |
|
ash，ppm |
<4 |
|
Refractive indices，250C |
1.4666 |
|
Thermal conductivity |
- |
|
BTU/hr.ft2(0F
/ft) |
- |
|
1000F |
0.093 |
|
2000F |
0.092 |
|
Specific heat ，BTU/
lb.
0F |
- |
|
1000F |
0.50 |
|
0.53 |
- |
|
Dielectric strength |
37.8kV |
The above data is not used for preparing the product specifications |
